It’s a big problem…. find the perfect body you want and all of a sudden you realise that you need a neck that matches the level of wear on the body. Thankfully, we’ve got you covered on this too. If you’re searching for the easiest way to build up a partcaster then you’ve come to the right place. Our aged necks can be sold independently or we can pair it with one of our bodies for both fit and aesthetics. We have detailed the specs we use below, please allow room for machining discrepancies although you should find the measurements to be very accurate. Please note we do not make our own necks.
- Maple or slab rosewood
- 7.25” or 9.5” radius
- Round and square heel necks available
- C profile
- truss rod adjustment at heel
- sanded volute
- 21mm at 1st, 24mm at 12th
- medium jumbo fret wire measuring 2.62mm x 1.17mm on the 9.5” radius (vintage size fretwire on 7.25” radius)
- rolled fingerboard edges
- bevelled fret ends
- dot markers
- nut width 42mm
- tuner holes 8.64mm
- full nitro finish and aged to taste
Final fretwork and nut installion can be carried out at additional costs however you may prefer to leave this to your local tech or luthier. Tuners can be provided at cost as well as a vintage round string tree which can be installed once the final set up has been carried out.
Check out our price list for detailed costs.